Sale

Elite SPK450 1 Inch Residue Pump

0 Review

1" Manual Submersible Pump
Removes Surface Water To 2mm
85L Per Min Flow Rate
Pumps Water Vertically To 10m
Removes Solids Up To 2mm
10m Power Cord Included
Ideal For Flood Restoration

1. Enter your room dimensions

Room cubic capacity m3 (length x width) x height (m)

m³

2. Enter your space conditions

Average Room Temperature (20°C - 40°C)

Current Humidity %

Target Humidity %

Calculation based on approximate maximum moisture load and is subject to internal conditions within the space. Real world results may vary depending on factors including but not limited to; severity and source of moisture infiltration, quality/type of building construction, temperature, location and unit settings. Results provided are strictly deemed as guidance, and real world performance, functionality and suitability of units within a space cannot be guaranteed

2 Years Warranty

Call for advice 0808 196 6381

Description

Elite SPK450 1" Residue Pump

Manual residue pump for removing surface water down to 2mm

The Elite SPK450 Manual Residue Pump can be fully submerged to a depth of up to 5m to pump water away from an area. It has a 1" diameter outlet with a maximum flow rate of 85-litres per minute, and it can pump water vertically up to a maximum height of 10m. The SPK450 submersible pump can quickly move large quantities of water. It is ideal for draining basements, buildings, trenches, and other domestic, commercial, and industrial spaces following a flood or leak.

This efficient water pump can remove water down to just 2mm surface residue. It is ideal for remediation and restoration. The Elite SPK450 can also pump away small solids of up to 2mm that are in the water. It has an adjustable outlet that can be set to pump water out from the top or the side of the pump for application convenience. The pump comes with a 10m power cord and lifting rope included, and a 10m length of 1" diameter layflat hose is available as an optional accessory.

Specification

Voltage: 110v
Suction Type: Submersible
Outlet Diameter: 25mm (1 Inch)
Outlet Direction: Top or Side
Max Flow Rate: 85L per min
Material Intake: Clean & Dirty Water
Motor: 450W
Cut Off Switch: Manual
Plug: 16 Amp
Max Lifting Height: 10m
Power Cable Length: 10m
Motor Thermal Protection: Included
Lift & Lowering Rope: Included
Handle: Included
Weight: 11kg

Pump Housing: AlSi12
Pump Shaft: Stainless iron
Mechanical Seal: Alumina/Graphite (Dual Seal)
Pump Base: NBR with stainless inserted
Impeller: NBR with stainless inserted
Type of liquid: Water with no suspended abrasive material, PH value:6.5-8.5
Max liquid temperature: 40℃
Max Submersion Depth: 5m
Max. Diameter of solids: 2.0mm
Protection Class: IP68
Insulation Class: B

What's In The Box

Elite SPK450 1" Submersible Residue Pump (110v)
10m Power Cord
Lifting & Lowering Rope

Reviews

You're reviewing:

"Elite SPK450 1 Inch Residue Pump"

Why choose us

Specialists in humidity control

At Climate Dry, we are your one-stop shop for cutting-edge drying equipment designed to tackle moisture-related challenges effectively. We provide premium dehumidifiers, water pumps, air movers, heaters, and other products that help maintain optimal humidity levels, combat dampness, and protect your spaces from water damage.